MCON NSG 40
- Minimum Order Quantity
- 10000 Bag
- Price Range
- 100.00 - 650.00 INR
- Grounding Material
- Physical Form
- Grey, Other
Product Description :-
MCON NSG 40 is a blend of Portland cement, graded fillers and chemical
additives which impart controlled expansion in the plastic state whilst
minimizing water demand. The low water demand ensures high early
strength. The graded fillers are designed to assist uniform mixing and
produce a consistent free flowing grout. It is suitable for gap widths between
10 mm-50 mm.
Areas of Application :-
MCON NSG 40 is used for machine foundation grouting
Excellent as a grouting compound for base plate grouting of heavy
duty machines, turbines etc.
Also used for grouting/filling the Tie Rod holes/slots in the high quality
Good for anchoring wide range of fixings.
Features & Benefits :-
Dual Expansion â Expands in plastic state as well as post initial setting.
Low water permeability â excellent resistance to ingress of water so can
be used in Tie rod holes grouting.
Pre packed â Factory controlled mixing avoids onsite batch mixing
Free Flow â Ensures that the grout easily reaches in all slots of the
Method of Application :-
Surface Preparation :-
Foundation surface: The substrate surface must be free from oil, grease or
any loosely adherent material.
If the concrete surface is defective or has laitance, it must be cut back to a
Bolt holes and fixing pockets must be blown clean of any dirt or debris.
For best results a mechanically powered grout mixer should be used.
When quantities up to 50kg are used, a heavy duty slow speed drill
(400-500 rpm) fitted with a paddle is suitable.. Larger quantities will
require a heavy duty mixer.
The quantity of clean water required to be added to a 25kg bag to
achieve the desired consistency is given below :
o Pourable : 4.125 litres
o Flowable : 4.500 litres
The selected water content should be accurately measured into the mixer.
At 30Ë C place the grout within 20 minutes of mixing to gain full benefit
of the expansion process.
MCON NSG 40 can be placed in thicknesses up to 50 mm in a single pour
when used as an underplate grout.
For thicker sections it is necessary to fill out MCON NSG 40 with well
graded silt free aggregate to minimise the heat build - up.
Typically a 10 mm down aggregate is suitable. 50 - 100% aggregate weight
of MCON NSG 40 can be added.
25 kgs. bags
- Payment Terms
- Cheque, Cash in Advance (CID), Cash Advance (CA)
- Supply Ability
- 50000 Bag Per Day
- Delivery Time
- 4 Days
- Packaging Details
- plastic Bag
- Main Export Market(s)
- Main Domestic Market
- All India