|Home||» Products||» Construction Chemicals||» MCON SUPER ADD|
MCON SUPER ADD
- Minimum Order Quantity
- 10000 Bag
- Price Range
- 100.00 - 650.00 INR
- Grey, Other
- Easy Usable
- Physical Form
- Repair & Rehabilitation
Product Description :-
MCON SUPER ADD is used as a cementitious grout additive where a low
water/cement ratio and a medium expansion are required. The material is
a combination of a plasticizing agent, and a gas producing expansive
medium, with suitable fillers; which generates gas during the hydration
process before the initial set takes place, counteracts the natural settlement
and shrinkage of the grout. Stability and cohesion of grout are greatly
increased. The selected fillers used, ensure uniform mixing. MCON SUPER
ADD gives controlled expansion to avoid excess pressure built up but
sufficient pressure is developed to provide complete contact of the grout
with the bearing surfaces, without voids.
Features & Benefits :-
Improved fluidity so ideal for injection grouting.
Volume expansion in the wet state to develop non-shrink property.
Chloride free - does not attack reinforcement or prestressed cables.
Non-shrink property ensures retention of original volume.
Reduced water/cement ratio ensures low permeability and long term
performance in service.
High compressive strength in the range of 40N / mm2 after 28 days,
when using good OPC.
Facilitates the production of a cohesive grout.
MCON SUPER ADD is used for Bed grouting, non-shrink in filling and
jointing, joint filling between precast concrete units, grouting of voids in
structural members, grouting of pipe joint and normal repair work where
shrinkage must be avoided.
TECHNICAL DETAILS :-
Nature : Cementitious grey powder
Compressive Strength : The plasticizing action of MCON SUPER ADD
allows reduction of the water cement ratios of cementitious grouts whilst
maintaining flow properties.
Chloride Content : Nil
Time For Expansion : 15 minutes - 2 hours.
Temperatures : Above 20o C may slightly reduce these times.
Methods of Application :-
For best results a mechanically powered grout mixer must be used. For
quantities upto 50kg, a slow speed drill fitted with a high shear paddle is
suitable. Large quantities will require a high volume drum mixer. It is
essential that machine mixing capacity and labor availability is adequate
to enable the grouting operation to be carried out continuously. The
cement (and sand if required) shall be slowly added to MCON SUPER ADD.
Mixing shall be continued for 5 minutes, making sure that a smooth even
consistency is obtained.
It shall be ensured that areas to be grouted are clean, sound, and then
pre-wetted. The unrestrained surface area of the grout must be kept to
a minimum. The grout shall be placed within 20 minutes of mixing to
gain the full benefit of the expansion process.
On completion of the grouting operation, any exposed areas which are
not to be cut back should be thoroughly cured by means of water
application or wet hessian.
200 gms Pouch , 25 kg in moisture-resistant bags.
- Payment Terms
- Cheque, Cash in Advance (CID), Cash Advance (CA)
- Supply Ability
- 50000 Bag Per Day
- Delivery Time
- 4 Days
- Packaging Details
- Main Export Market(s)
- Main Domestic Market
- All India