|Home||» Products||» Wall Putty||» MCON MAGIC COAT|
MCON MAGIC COAT S is an all purpose, unique, colourless, water repellent emulsion based on silicone. It offers excellent resistance to positive pressures. It provides 100% water repellency to the external surface keeping the looks of the surface as it is.
AGIC COAT S MAGIC COAT S has excellent breathing properties, water resistance, weathering durability, and excellent resistance to growth of microbial organisms.
MAGIC COAT S must be applied to new or old substrates that are structurally sound and well painted.
|Appearance||Clear to light yellow liquid|
|Specific Gravity||0.8 Â± 0.05|
|Drying Time||4 - 6 hours|
Clean the surface with wire brush or scrubber to remove hidden dirt, loose particles, laitance & dust. Degrease the surface by using suitable solvents.
Repair the spalled concrete portion by saw, cutting the extreme edges of the repair location to a depth of at least 10 mm to avoid feather edging & to provide strong bond.
The surface of application must be brought to a touch dry state. Take up the first coat application with a stiff nylon brush. Work well into the substrate, to ensure that all small undulations are completely filled with the coating.
Complete the application and leave to air cure for 2 days.
Curing Treatment: MAGIC COAT PU membrane must be cured for a minimum of 72 hours @ 27Âº c before placing protection. Where damage to the membrane is possible (by traffic, backfilling, etc) it should be protected by a cementitious screed or protection boards.
As a waterproofing coating: 50 â 60 sq.ft./ liter in single coat
1 liter, 5 liter, 20 liters
12 months in original packing if stored at room temperature i.e.25â