|Home||» Products||» Wall Putty||» MCON SUPER COAT PASTE|
MCON SUPER COAT PASTE
- Minimum Order Quantity
- 10000 Bag
- Price Range
- 100.00 - 650.00 INR
- Gre4y, Other
- Physical Form
- Smooth Finish,Water Resistant
Product Description :-
MCON SUPER COAT PASTE is an acrylic polymer based water resistant wall
putty in paste form, which is ready to use putty. This is especially used to
seal the pinholes and the blow holes getting exposed on concrete /
plastered surfaces and to provide smooth even surface on gypsum plaster
for next coating. It can be applied on internal and as well as external
surfaces. It gives more adhesion strength and increase the life of paints.
Areas of Application :-
Use on both precast and concrete structures like sand cement plaster,
level brick work and block work, exposed concrete.
Ideal for application on ceilings and gypsum plastered surfaces
Plywood, AC sheets
Can also be applied for redecoration on firm, old painted areas.
Features & Benefits :-
Synthetically bound ready to use compound for inert filler material.
Ready to use wall putty with excellent bond strength.
Ensures use on all common types of building interiors.
Excellent adhesion & thixotropicness.
Due to good bonding property it is more durable.
Excellent finishing and easy to apply.
Provides smooth, silky and featheredged finish to substrate to facilitate
better texture of paint.
Method of Application :-
Surface Preparation :-
Make sure that the surface is absolutely clean, dry and free from dust,
grease and foreign materials.
There should be a time gap of at least 10 days before MCON SUPER COAT
PASTE application is done on newly plastered surfaces.
Ensure that the surface is fairly even.
If concrete surface is to be painted, it shall be washed with a water jet at
3000 psi and all loose concrete should be getting removed and all pin holes
and blow holes should get opened.
Coating Application :-
Apply the ready to use mixed material with putty knife from bottom to top
by ensuring complete filling of holes with putty material and featheredged
finish. The coating should be about 0.5 mm thick.
Second coat of MCON SUPER COAT PASTE depends up on the exposed
surface after first coat (generally both coat do not exceed 1 mm) and leave
the surface to dry overnight. The drying time of each coat should be 4
hours, but will vary from surface to surface.(depending upon atmospheric
Finishing: Make sure that the material has fully covered the substrate and
dried. If putty applied surface is rough, surface should be made smooth by
rubbing suitable emery paper on it. Ensure that the paper is fine and does
not cause scratches on the MCON SUPER COAT PASTE coating area.
Painting: The smooth surface finished with MCON SUPER COAT PASTE does
not require any putty or primer before paint application. Just apply any
paint as per the manufacturer's standard specification.
1.2 to 1.5 mÂ² per kg when applied at a thickness of 0.5 mm.
Packing :- 20 kg. plastic lined sacks.
- FOB Port
- Payment Terms
- Cheque, Cash in Advance (CID), Cash on Delivery (COD)
- Supply Ability
- 50000 Bag Per Day
- Delivery Time
- 4 Days
- Sample Available
- Packaging Details
- Main Export Market(s)
- Main Domestic Market
- All India