|Home||» Products||» Construction Chemicals||» MCON STEEL ZRP|
MCON STEEL ZRP
- Minimum Order Quantity
- 10000 Bag
- Price Range
- 100.00 - 650.00 INR
- Grey, Other
- Physical Form
- Repair & Rehabilitation
Product Description :-
MCON STEEL ZRP is a two component polyamine cured zinc rich epoxy
coating. MCON STEEL ZRP is a two pack system enriched with metallic zinc
to provide outstanding performance in highly corrosive environment.
Metallic Zinc imparts Cathodic protection to the base metal. It resists photo
degradation by UV light as it contains UV absorber. MCON STEEL ZRP has
high zinc content to provide steel with protection of undercoating.
Areas of Application :-
Structural steel and piping exposed to a wide range of corrosive
atmospheric environments up to very high.
Recommended for offshore environments, refineries, power plants,
bridges, buildings, mining equipment and general structural steel.
Features & Benefits :-
High solids ensures better protection.
High zinc content for the best of anti corrosion properties.
Designed for severe corrosive environments.
The product conforms to the compositional requirements of SSPC paint
20, level 2 and ISO 12944/ISO 20340 and the zinc pigments comply with
ASTM D520 type II zinc dust.
UV Resistance - It has excellent UV resistance and adhesion.
New binder technology shows superior performance in adhesion /
Factory made product with consistent quality.
Fast dry-to-recoat and dry-to-handle.
Method of Application :-
When preparing new surfaces, maintaining already coated surfaces or aged
coatings it is necessary to remove all contamination that can interfere with
coating adhesion, and prepare a sound substrate for the subsequent
Remove oil, grease and other contaminants using proper degreasing agent.
For severe corrosive conditions blast clean the surface. Special care must be
taken on weld areas to remove flux & spatter.
The cleaned surface should be coated before it gets contaminated.
Stir base thoroughly then mix three parts base and one part hardener by
volume to uniform consistency.
Allow the mixture to mature for 20-30 min. and stir again before application
& occasionally during use to prevent setting of metallic zinc.
For Brush Roller,Airless spray application, no thinning is required.
In conventional spraying, 5 % to 10 % thinning is recommended for ease of
10 to 12 m2 per pack of 4 Ltr.
4 Ltr pack
- Payment Terms
- Cheque, Cash in Advance (CID)
- Supply Ability
- 50000 Bag Per Day
- Delivery Time
- 4 Days
- Packaging Details
- Main Export Market(s)
- Main Domestic Market
- All India