|Home||» Products||» Tile Adhesive||» MCON NSA White|
White, high polymer modified, cement-based wall and floor tile adhesive. Suitable for fixing marble,tiles and natural stones in interior and exterior situations, including swimming pools.
MCON NSA WHITE is ideal for concrete, plaster and also tile substrates. It is an adhesive for the permanent fixing of Marbles and all type of tiles both in damp and submerged conditions.
Suitable for fixing at 3 - 6mm bed thickness (can be extended up to 12 mm in area of limited extent) wall and floor tiles, mosaics, vitrified and fully vitrified tiles, marble, terrazzo and natural stone. The set adhesive is water-resistant and is suitable for use in showers and totally immersed situations such as swimming pools.
MCON NSA WHITE meets the performance requirements of BS.5980:1980 (The United Kingdom) and is a CE Certified Product.
MCON NSA WHITE should be mixed with water in the ratio of 4:1 by volume with the help of slow speed drill having paddle attachment. Blend until a homogeneous, lump-free mixture is obtained.
Spread not more than 1 sq.m. at a time, apply the adhesive to the wall or floor surface.
Comb the adhesive to the required depth (between 3 - 6 mm) using a suitable trowel.
Press the tiles firmly into position with a slight twisting action, checking periodically that good contact is maintained with the back of each tile. Leave no voids behind tiles when solid-bed fixing.
Tiles should be fixed within 20 minutes of adhesive being applied, depending on the porosity of the surface and atmospheric conditions. Tiles can be adjusted up to 10 - 15 minutes after fixing. Touch the adhesive ribs periodically and if a skin has formed, remove the adhesive and apply a new layer.
Leave adequate joints between individual wall and floor tiles unless self spacing tiles are used.
Clean off surplus adhesive from the tile face and between joints.
Do not use in damp conditions and 0 temperature less than 5 C
Do not apply:
MCON NSA WHITE is supplied in 20 kg HDPE bag.
20 kg of MCON NSA WHITE will cover 3 to 4 mÂ² with recommended thickness of 4 to 5 mm.
MCON NSA WHITE will have a shelf life of 12 months in unopened containers when kept in dry conditions at a temperature between 5ÂºC to 45ÂºC. Storage at higher temperature or high humidity may reduce shelf life.
MCON NSA WHITE is non-toxic. However, splashes on the skin should be washed well with water and in contact with eye occurs, wash well with water and seek medical advise.