Back to top
+918068210324
Home » Products » Construction Chemicals » MCON CURE WC

MCON CURE WC

MCON CURE WC
MCON CURE WC
Send Inquiry
Product Code : 29
Product Description

Description

MCON CURE WC is supplied as a ready to use solvent free acrylic polymer based, white pigmented, non-staining, non-toxic, aqueous solution which when applied to fresh concrete surfaces, reacts with free lime and seals the pores, which is nearly completely impervious to water vapour thus reducing the evaporation of water from the mix which assist curing process. The formed membrane facilitates the finishing process and is incorporated easily into the surface. It is used as a curing aid for fresh concrete floors, screeds, granolithic toppings and vertical surfaces.


Areas of Application

MCON CURE WC is used as a curing aid for fresh concrete floors, screeds, granolithic toppings and vertical surfaces. It can be used in areas of poor ventilation and further treatment can be done on MCON CURE WC coated surface.


Features & Benefits

Curing is essential for the hydration of cement in concrete making. So, to maintain required moisture content, some precautions are applied. Concrete curing compound is a compound which helps to prevent the loss of moisture content from the concrete. So, concrete is properly cured which results the full development of strength of concrete.

  • Premixed, ready to use.
  • Can be used as a curing aid If wet curing is not possible
  • For larger areas of concrete surfaces which are opened to sunlight, wind etc. curing is big task. But with the presence of curing compound it is easier.
  • Chloride free
  • Eliminates water curing. Columns, beams, slabs can also be cured with curing compound
  • Replacement to irregular, insufficient and delayed curing.
  • Non toxic and inflammable.


Application

Curing compound is applied when the finishing is completed and free water present on the surface gets disappeared.

The curing compound is applied through spraying pipe as shown in above figure with constant rate of pressure.

Generally, one liter of curing compound can be sprayed for 0.20 – 0.25m2 surface area of fresh concrete.

In small areas, we can also use brushes or paint rollers to apply curing compounds.


Technical Specifications:

Homogeneity Homogeneous
Colour White
Chemical Base Acrylic Co Polymer
State Liquid
Density 1.02 ± 0.03 g/cm³
Chloride Content < 0.10 mass
Reflectance 50 % as per ASTM C 309: 06.
Shelf life Approx. 1 year from date of production if stored properly


PACKING & COVERAGE

Packing: 5 litrs, 50 liters, 200 liters

Coverage: 5 to 6 m2 per liter


HEALTH & SAFETY

MCON CURE CC is non-toxic. However, splashes on the skin should be washed well with water and in contact with eye occurs, wash well with water and seek medical advice.


MCON RASAYAN PVT. LTD.
X