|Home||» Products||» Tile Grout||» MCON Grout Sealer|
MCON TILE GROUT is a blend of Portland cement, chemical additives and fillers. It has hydrophobic properties that allow tile joints to resist water. Used for filling tile joints of width 1mm to 5mm in both interior and exterior areas. MCON TILE GROUT is recommended for ceramic, vitrified, non-vitreous clay tile, natural stone and engineered stone/agglomerates. Ideal for floors and walls, it is suitable for wet areas too.
Areas of Application
Suitable for filling tile joints at 1 â 5 mm joint thickness wall and floor tiles, mosaics, vitrified and fully vitrified tiles, marble, terrazzo and natural stone. The set tile grout is water-resistant and is suitable for use in showers and totally immersed situations such as swimming pools. MCON TILE GROUT can be used in Residential, commercial, external facades and wet areas.
MCON TILE GROUT should be mixed with water in the ratio of 400 ml. per kg with the help of slow speed drill having paddle attachment. Blend until a homogeneous, lump-free mixture is obtained.
Clean off surplus adhesive from the tile face and between joints.
When applying, the grout joints should be free of dirt, debris or tile spacers.
Pack joints full and free of voids with rubber grouting float.
Sponge or wipe dust/dirt of tile faces and remove water standing in joints.
Remove excess grout from tile faces using edge of rubber float and diagonal strokes (at 45Â°angle to direction of joints).
When the joints have set, use a moist sponge to remove excess grout from the tile and joint. Use minimal water for clean up.
Final clean up to remove any grout haze should be carried out within the next 12 â 24 hours.
MCON TILE GROUT is supplied in Â½ kg box and 5 kg Pouch. Bulk packing of 20 kg. is available for projects. COVERAGE FOR 10 Kg MCON TILE GROUT
MCON TILE GROUT will have a shelf life of 12 months in unopened containers when kept in dry conditions at a temperature between 5ÂºC to 45ÂºC. Storage at higher temperature or high humidity may reduce shelf life.
MMCON TILE GROUT is non-toxic. However, splashes on the skin should be washed well with water and in contact with eye occurs, wash well with water and seek medical advice.